The all new Neckbeard 3.0 from Channel Islands with Spine-TEK construction. An updated template on the already epic Neckbeard 2 to add more control.
Dimensions:5’8 | 19 3/8 | 2 7/16 | 29.2L |
5’9 | 19 5/8 | 2 1/2 | 30.7L |
5’10 | 19 7/8 | 2 9/16 | 32.3L |
5’11 | 20 | 2 5/8 | 33.8L |
6’0 | 20 1/8 | 2 11/16 | 35.2L |
6’2 | 20 3/8 | 2 3/4 | 37.5L |
6'4 | 201/2 | 2 13/14 | 39.6L |
"When something isn’t broke, there’s no need to fix it. That said, Britt Merrick and Dane Reynolds still felt a few slight refinements would make an already epic board that much better. And it did: The merits of our original NeckBeard’s update (aka NeckBeard 2) were seen in Dane’s surf film “The Electric Acid Surfboard Test.”
"A big fan of single concave, Dane asked Britt to take out the vee from the original NeckBeard, creating single throughout. This changed the rocker landscape some, but in a very positive way—enhancing its wave entry, down-the-line speed, and overall control. They also widened the tail block 1/2” and added a slight hip, resulting in increased responsiveness and maneuverability."
"In our 3.0 tweak to this great design, we updated only the tail by rounding out its signature square block. While the NeckBeard 3 is the exact same shape in every other way, its new tail design makes this skatey, angular turning air board more versatile by providing smoother transitions in the pocket and buttery carves out on the face—not to mention better hold and more confidence in the barrel."
"The NeckBeard 3 is built with the tri-fin set up in mind but also works very well as a quad via a five-fin setup, allowing you to get the best of both worlds. Available in both PU/PE and EPS Spine-Tek."
- Futures thruster compatible. Fins NOT included, however we at Zuma Jay offer great deals on all of our Future fins if bought with this board!
- UL/SO 4+4/4 ECO Epoxy glassing
- Sustainable Surf Certified Eco-board
Channel Islands introduces SPINE-TEK
"We are proud to announce our collaboration with Shapers Australia to launch SPINE-TEK; a precision engineered stringer spine utilizing a unique composition of fiberglass and resin. SPINE-TEK is based on the principles of elastic energy, to flex under pressure and then return the surfboard back to its natural rocker, providing surfboards with a more lively and responsive feel."
"Performance through innovation, SPINE-TEK® is a world’s first with its unique fiber-based composition, delivers optimal flex based performance through the principles of elastic & kinetic energy. Through this process the surfboard loads up on energy and then releases, generating additional drive, speed, power & flow."
"Weighing a mere ¼ of a pound and installed in the surfboard deck, SPINE-TEK replaces the traditional heavier timber stringers and is virtually break free."